TPT20102

2-bit Bidirectional Level Shifter for Open-Drain and Push-Pull

数据手册

概述
开发资源
应用

概述

The TPT20102 device is a 2-bit level shifter with an enable (OE) input and can work from 1.4 V to 3.6 V VCCA and 1.65 V to 5.5 V VCCB. VCCA must be less than or equal to VCCB. The TPT20102 supports bidirectional voltage translation among 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V.

The A1~2 I/Os are connected to the B1~2 I/Os, which allows bidirectional data flow between ports. If OE is low, the translator switch is off, and a high-impedance state exists between A ports and B ports to isolate both sides. OE input circuit is internally connected to VCCA.

The 2-bit bidirectional buffer isolates capacitance and allows 15 pF on either side of the device to support 100 Mbps speeds in Push-Pull mode in 3.3 V VCCA and 5 V VCCB supply, and support 1.2 Mbps speeds in Open-Drain mode.

TPT20102 is available in VSSOP8 package and is characterized from −40°C to +125°C.

Status

Preview
Rating

Industrial
Technology Family

TXS
Number of Channels

2
Supply Range (V)

1.65-3.6/1.65-5.5
Input Type

Transition Gate
Output Type

Push-pull output/Open drain
DC Drive Strength (mA)

1.5
Operating Temperature Range (℃)

-40 to +125
Package

VSSOP8

开发资源

文档

显示筛选器

隐藏筛选器
文档
- 数据手册
- 选型手册
- 应用笔记
- 技术文章
- 产品简介
- 用户指南
- 测试报告
- 文档名称
- 类型
- 语言
- 日期
- 思瑞浦模拟产品选型册
  
  选型手册
  
  中文
  
  01/19/2024
- 思瑞浦逻辑产品选型册
  
  选型手册
  
  中文
  
  01/22/2026
- Datasheet_TPT20102
  
  数据手册
  
  英文
  
  01/16/2026
  
  2-bit Bidirectional Level Shifter for Open-Drain and Push-Pull
- Introduction to Latch-up and the Preventive Measures
  
  技术文章
  
  英文
  
  01/19/2024
- Introduction to ESD Performance of a Silicon Chip
  
  技术文章
  
  英文
  
  01/19/2024
- Application Tips on ESD-EOS
  
  技术文章
  
  英文
  
  01/19/2024